AUDAC PMX124 User Manual download pdf (Page 18)

Applications

Setup procedure

1. Before connecting the microphones and instruments, be sure that all devices are turned off. Also be

sure that all of the mixer’s channel faders and master control faders are set all the way down.

2. For each connection, connect one end of the cable to the relevant microphone or instrument, and

connect the other end to the appropriate input jack on the mixer.

NOTE: Where an input channel contains both a ‘Mic Input’ and a ‘Line Input’ jack, you may use either one of these

jack’s but don’t use both at the same time.

3. To avoid damage to the speakers, power-up the devices in the following order:

Peripheral devices  Mixer  Power amps (or powered speakers).

NOTE:

When shutting the system down, turn off the power in the opposite order:

Power amps (or powered speakers)



Mixer



Peripheral devices.

Chapte

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

AUDAC PMX124 User Manual Page 18